Royalty-free—what it is and is not

Posted on by lombardcoo

(Plus a list of RF stock sites!)

We’ve all been there—you’re working on a project and need some stock media. You know you can’t use just anything off of the internet because of copyright law. But even when you go to sites that offer stock media, it can be confusing understanding what you can use and how.

Royalty-free does not always equal fee-free.

While we might think that royalty free (rf) media is free to use. This is not always the case. The term simply means that you do not have to pay the creator royalties. Think how authors get paid for every copy of a book sold, or how a musician gets paid for every stream on Spotify. Those payments based on the number of times a work is used are royalties. You can check out this post by Amos Struck for a more comprehensive explanation.

For RF media you pay* once and that’s it. Sometimes the payment is $0. Sometimes it’s crediting the creator. Sometimes you have to pay a one-time fee. Many RF stock sites contain images that fit into multiple categories. Whenever on a stock website, always check that you have set your filters to only show you free content if that is what you are looking for.

I’ve compiled a list of sites that provide royalty-free (RF) images, video, and/or audio below.

I’ve also included some creative commons (CC) sites. Those are special licenses that allow you to use the media for free, but there are sometimes limitations on how you can use the media, and how to credit the author. See more on creative commons and the various types of licenses here. Or you can check out the Comm Labs resources on Creative Commons here.

General Stock Sites

These sites have images along with video, and sometimes audio

Openverse Creative Commons Search

Adobe Stock (Note: there do not appear to be free audio files, only images and video) Not all stock on the site is free, but there’s a good selection that is. Just make sure to check the ‘free’ box in the filters when searching. If it asks you for payment when you click license, then you know you need to search again.

PixaBay is free to use without attribution in most cases. Check their license for more.

Canva also has plenty of free images you can use, along with some video, animations, and their templates. Items with crowns next to them are only available with paid accounts. Note: you get more stuff for free if you sign up with your Simmons email address, since education accounts get access to many (but not all) premium features.

DepositPhotos focuses on imagery, but also has some free videos and music. Just be aware that not all works on the site are free, much like Adobe stock. So make sure to stick to the free filter. All their free content requires attribution.

Audio

BenSound has a section of the site with music that is free with attribution

Purple Planet music is free with attribution in most cases. Check out their license page for more info.

Free Sound is good for sound effects and the like

Zap Sounds free sound effects 

Images

Unsplash is my go-to. RF with attribution, so make sure to credit the person who made your media!

Burst from Shopify has good stock images. The collection is geared towards supporting its main business as a platform for independent e-commerce shops, so the stock does tend to reflect that.

Jopwell has a selection of stock photography available focusing on BIPOC in business and education settings. It’s fairly specific, but useful when you need corporate imagery.

WOC in Tech Flickr page similarly focuses on a narrow remit but does it well. Note that not all images on Flickr are RF or CC, but images by/on this particular page are. (If using Flickr, always check the copyright status of the individual image you are interested in using)

Gratisography has funky imagery that is off-beat

KaboomPics is good for lifestyle and interior design shoots

StockSnap.io has images that are licensed as CC0, meaning free of all copyright restrictions.  

iStock. Be VERY careful about which images you are selecting. iStock is owned by Getty images—one of the largest and most prestigious photo libraries in the world. They want to funnel you to their paid site, but there is a lot of microstock that is free, if you make sure to search carefully.

Pexels. Note: some photos are free. Others and videos are RF (for a fee)

How to Use Font Explorer X Pro

Posted on by Emily Zieg

FontExplorer X Pro is a software for finding and managing fonts, available on all lab computers. It works similarly to Adobe Fonts in that you can find and activate new fonts from a server.

Activating fonts from the server

To add a font from the FontExplorer server, click on the SERVERS dropdown menu, select VMFONTEXPL, then Fonts. This will show a list of all the fonts available on the server.

If you want to activate a specific font, start typing its name into the search bar. When you see the font you want, click on the checkbox next to its name to activate it. You can activate select styles from the font (e.g. italic, bold) by clicking the dropdown arrow next to the font’s name. Click on a style to preview it.

Adding downloaded fonts

You can also add fonts that you downloaded from other sources. Unzip the file that you downloaded and open the folder. There should be a list of font files inside.

Select all of the ones you want to add to FontExplorer, then drag them onto the FontExplorer window until a green plus sign appears. This will add the fonts to Font Explorer so you can access them from InDesign or other software.

Troubleshooting

FontExplorer must be open and running in order for you to access your fonts. Don’t quit FontExplorer until you are ready to log off.

If you accidentally open another font management software, such as FontBook, it will conflict with FontExplorer and you will get this message. Click Proceed to quit FontBook and continue using your FontExplorer fonts.

Placing an InDesign Document in InDesign

Posted on by Emily Zieg

Let’s say you have created an awesome poster in InDesign and you want to feature it in your design journal. What are your options? You could save a picture of the poster as a PDF or JPEG and place that in your design journal document…or you could place the original InDesign file!

What are the advantages of this? Well, to start, any edits you make to your poster later are easily synced with the document you placed it in. You also don’t have to worry about what resolution or colors your JPEG file uses, because those will be retained from your InDesign document. So let’s get started!

Selecting a file

Just like placing any other object in your InDesign document, start by going to File > Place. Navigate to the file you want to use. Before you open it, click the Options button and check the box labeled Show Import Options. Then click Open. If you don’t check this box, InDesign will place the first page of your document by default.

Selecting pages

By default, InDesign will place the first page of the document. If you want to place a different page, or more than one page, you can do so in this dialog box:

  • Previewed Page places the page you see in the preview panel. You can changed the previewed page by clicking on the arrow buttons on the bottom.
  • All Pages places each page in the document, one after the other.
  • Page Range allows you to select a single page by its page number, or a range of pages. Entering 2 will give you page 2, entering 3-5 will give you pages 3, 4, and 5, and entering 3, 5 will give you pages 3 and 5.

Placing pages

Once you have selected the pages you want to place, click OK. The first page you selected is now attached to your cursor. Click and drag to draw a frame and the page will automatically be placed inside (clicking once places the page at full size). If you selected more than one page, your cursor will have the next page ready to go on your next click. If you selected too many pages, you can press Esc to cancel.

Changing the page

If you want to change which page you place, select its frame and open the Links panel (Window > Links). Click the chain icon to Relink. This will let you select the file again and change the pages that you import. You can also relink the file in the Properties panel (Window > Properties) by clicking the Import File button under Quick Actions.

Exporting XD Elements in Batches

Posted on by ambros

Overview:

  • Select assets and artboards for export
  • Mark artboards for batch export

Select assets and artboards for export

macOS

Select an object or an artboard, navigate to File > Export or press Cmd + E.    

Windows

Select an object or an artboard and navigate to File > Export.  

  • Batch: You can batch export assets that are marked using Mark for Export option in the Property Inspector. To export multiple objects as a single asset, group the objects before export.
  • Selected: You can select and export specific assets.
  • All artboards: You can select all the artboards for export in a design project.
  • After Effects: You can select the asset to export to After Effects.

Mark artboards for batch export

Go to your Layers panel (hotkeys: CTRL + Y) to view your list of artboards

Hover over an artboard to show the Mark for Export symbol or use the keys Shift + E. Click on the button.
Repeat for all the artboards you want to export.
Go to File > Export > Batch
Select your export options

Additional Resources:

Export design assets | Adobe XD

One Minute Tutorial! The Select and Mask Tool

Posted on by Zoe Zeballos

It can be difficult to manually trace an image featuring an object with hair or fur. That’s where the select and mask tool comes in. Watch this tutorial to learn how to use the select and mask tool to cut out an object with a tricky silhouette in Adobe Photoshop.

@hsndeeb

Cut out Fur or Hair in Photoshop #removebackground #adobephotoshop #tiktoktutorial #catphoto

♬ Dancing in My Room – 347aidan

One Minute Tutorial! Paragraph Styles in InDesign

Posted on by Zoe Zeballos

Simplify text formatting in your InDesign document by using paragraph styles! This tutorial explains how to create new paragraph styles in your document and how to use them to make changes throughout your entire document automatically.

@_darga

Paragraph Styles in Adobe InDesign #adobe #indesign #photoshop #graphicdesign #artstudent #tutorial #howto #bookmaking #typography #design #fyp

♬ Cozy Beat – Aesthetic Sounds

One Minute Tutorial! Pathfinder Demo

Posted on by Zoe Zeballos

The pathfinder tool can be useful in uniting and editing simple objects into more complex designs. This demo shows how to make famous logos using only pathfinder.

@arynlei

Reply to @rebekahwallace03 Conceptually? Difficult. Technically? Pretty simple! Stay tuned for clipping mask ❤️ #adobeillustrator #learnontiktok #art

♬ Sixty Second Commercial 1 by Michael Reynolds – malcolm

30 Second Tutorial! Wrapping Text Around Irregular Shapes

Posted on by Zoe Zeballos

Learn how to wrap text around an irregular silhouette in Adobe Illustrator in this 30 second TikTok.

@raisedproper

Reply to @iamdavidkinghq Another technique using text wrap in Illustrator. #raisedproper #illustrator #photoshop #fyp #tutorial #losangeles

♬ original sound – user4368660699589

What is LinkedIn Learning/Lynda?

Posted on by indelici

LinkedIn Learning/Lynda is a site that offers video courses taught by experts about business skills, software skills, and for what you are probably here for… creative skills!

As Simmons students, we have access to the site which is a great resource for learning and freshening up on skills. There are courses on Adobe programs, specific skills and techniques, networking, productivity, industry standards, the list goes on.

In order to access the site, head over to lynda.com (LinkedIn Learning) and follow the “sign-in” link. From there, choose the option “sign in with your organization portal” using your Simmons login and password.

Voila!

The full courses can be rather long, but they are broken up into digestible sections that are a few minutes long.

Take this Illustrator 2021 Essential Training course for example.

The full course is 5.5 hours…

But the sections are only a few minutes each.

If you are looking to learn something specific, you can browse through the contents of the course and jump to where you need to be.

Per usual, the Lab Agents are always here to help you out and walk you through any issues you may be having. Happy learning!